One-Step Fiber Cleaver K-35
Fully automatic one-step cleave — single fiber and 1–12 ribbon fiber, cleave angle ≤ 0.5°, CNC aluminum-alloy body. Custom colors & logo available.
Typical work: Fusion splicing preparation; FTTH field work.
Get a Quote WhatsApp UsNeutral stock in small lots, or private label made to your requirements. Prices on request — EXW factory pricing.
K-35 key features
- One press, one cleave: a single pressing motion completes the cut — no multi-step operation needed
- Cuts single fibers and ribbon fiber of 1–12 fibers
- CNC-machined aluminum-alloy body — corrosion-resistant and built for field use
- Cleave angle held to ≤ 0.5°, for stable, consistent cleaves in any environment
- Tungsten steel blade with 24 positions — over 48,000 cleaves per blade
- Built-in waste fiber box collects the offcuts as you work
K-35 specifications
| Operation | Fully automatic one-step cleave — a single pressing motion completes the cleave |
|---|---|
| Fiber type | Single fiber and ribbon fiber (1–12 fibers) |
| Bare fiber diameter | 125 μm |
| Coating diameter | 0.25 / 0.9 / 3.0 mm |
| Cleave length | 9–16 mm |
| Cleave angle | ≤ 0.5° |
| Blade | Tungsten steel |
| Blade life | 24 positions × 2,000+ cleaves per position — over 48,000 cleaves per blade |
| Body | Aluminum alloy, CNC machined, corrosion-resistant |
| Dimensions | 76 x 85 x 53 mm |
| Weight | Approx. 220 g |
Compare the fiber cleavers range
Every product in this category, side by side on the figures that decide the choice. Blank cells mean the figure is not stated in our current data — ask us and we will confirm it for the model you mean.
| K-35 | K-21 | K-10 | K-90 | J20 | K-07 | |
|---|---|---|---|---|---|---|
| Fiber type | Single fiber and ribbon fiber (1–12 fibers) | Single fiber — single-mode and multimode | Single quartz fiber (ribbon fiber with exchangeable holder) | Single fiber — single-mode and multimode | Single fiber and ribbon fiber (up to 12 fibers) | Single fiber |
| Coating diameter | 0.25 / 0.9 / 3.0 mm | 0.25 / 0.9 mm | 0.25 / 0.9 / 3.0 mm | 0.25 / 0.9 mm | 0.25 / 0.9 / 2.0 / 3.0 mm | 0.25 / 0.9 mm |
| Cleave length | 9–16 mm | 5–20 mm (0.25 mm coating); 10–20 mm (0.9 mm coating) | Approx. 8–20 mm | 2–20 mm | 9–16 mm | — |
| Cleave angle | ≤ 0.5° | ≤ 0.5° (typical) | ≤ 0.5° | — | ≤ 0.5° | ≤ 0.5° |
| Blade life | 48,000+ cleaves | 48,000 cleaves | 48,000 cleaves | 6,000 cleaves | 48,000 cleaves | 36,000 cleaves |
| Dimensions | 76 x 85 x 53 mm | 100 x 85 x 64 mm (with scrap collector) | 83 x 55 x 52 mm | 124 x 20 x 40 mm | 63 x 76 x 63 mm | 75 x 60 x 50 mm (with scrap collector) |
| Weight | Approx. 220 g | 350 g | Approx. 250 g | 60 g | 350 g | 200 g |
Colors for the K-35
Where the K-35 works
Fusion splicing preparation
Part of the Fiber Cleavers range — see the specifications above for the figures that matter on this work.
FTTH field work
Part of the Fiber Cleavers range — see the specifications above for the figures that matter on this work.
K-35 components
- Upper cover
- Press plate
- Fiber support block
- Rubber press pad
- Fiber fixture
- Waste fiber box
- Tungsten steel blade
Documents for this model
Product Catalog 2026 — this model appears in our full-range catalog (PDF), published in the Downloads center.
User manual — if you need the manual for this model now, ask via the inquiry form below or on WhatsApp and we will send the available documents with your quote.
More fiber cleavers
Questions about the K-35
How long does the blade last?
The blade is rated for 24 positions × 2,000+ cleaves per position — over 48,000 cleaves per blade. When it is done, replacement blades are a standard stock item — see Fiber Cleaver Blades in this category, and tell us your cleaver model so we match the right blade.
Can the K-35 carry our own brand?
Private labeling is made to your requirements and confirmed per order — labels with your logo, part numbers and barcodes on the tools, the inner boxes and the outer cartons, ready for your warehouse. The products most often labeled are the K-35 cleaver, the KS-1 Kevlar shears and the K-870 stripper.
Can we order a small lot, unbranded?
Yes. Neutral stock is held for the core range: small lots are welcome, you can mix models in one shipment, and restock as you sell. Prices are on request — EXW factory pricing.
Ask for a quote — K-35
Tell us the quantity, and whether you want it neutral or with your brand on it.