Molded FTTH Fiber Cleaver K-07
A compact, economical bench cleaver in a die-cast aluminum body — built-in scrap collector, 200 g, and supplied in its own red storage case. The cleaver for FTTH drop work, mechanical splice prep and equipping complete tool kits.
Typical work: FTTH field termination; Mechanical splicing preparation; Tool kit bundling.
Get a Quote WhatsApp UsNeutral stock in small lots, or private label made to your requirements. Prices on request — EXW factory pricing.
K-07 key features
- Die-cast aluminum body from a precision mold — light and rigid, and priced for equipping every crew and every kit
- Built-in fiber scrap collector keeps cut shards inside the tool instead of on the splice tray or the floor
- Compact bench cleaver at 75 x 60 x 50 mm and 200 g — it works on the tailgate, the tray or the customer's floor
- Takes 250 μm coated and 900 μm buffered single fiber — the two builds an FTTH crew meets on drop work
- Simple manual operation — load the fiber, close the cover, slide and press; no power, no settings, nothing to charge
- Supplied in a red storage case (105 x 80 x 60 mm, 300 g all-in) that protects the cleaver between jobs
K-07 specifications
| Construction | Die-cast aluminum body |
|---|---|
| Operation | Manual |
| Fiber type | Single fiber |
| Cladding diameter | 125 μm |
| Coating diameter | 0.25 / 0.9 mm |
| Cleave angle | ≤ 0.5° |
| Blade life | 36,000 cleaves |
| Scrap collector | Built-in fiber scrap collector |
| Dimensions | 75 x 60 x 50 mm (with scrap collector) |
| Weight | 200 g |
Compare the fiber cleavers range
Every product in this category, side by side on the figures that decide the choice. Blank cells mean the figure is not stated in our current data — ask us and we will confirm it for the model you mean.
| K-35 | K-21 | K-10 | K-90 | J20 | K-07 | |
|---|---|---|---|---|---|---|
| Fiber type | Single fiber and ribbon fiber (1–12 fibers) | Single fiber — single-mode and multimode | Single quartz fiber (ribbon fiber with exchangeable holder) | Single fiber — single-mode and multimode | Single fiber and ribbon fiber (up to 12 fibers) | Single fiber |
| Coating diameter | 0.25 / 0.9 / 3.0 mm | 0.25 / 0.9 mm | 0.25 / 0.9 / 3.0 mm | 0.25 / 0.9 mm | 0.25 / 0.9 / 2.0 / 3.0 mm | 0.25 / 0.9 mm |
| Cleave length | 9–16 mm | 5–20 mm (0.25 mm coating); 10–20 mm (0.9 mm coating) | Approx. 8–20 mm | 2–20 mm | 9–16 mm | — |
| Cleave angle | ≤ 0.5° | ≤ 0.5° (typical) | ≤ 0.5° | — | ≤ 0.5° | ≤ 0.5° |
| Blade life | 48,000+ cleaves | 48,000 cleaves | 48,000 cleaves | 6,000 cleaves | 48,000 cleaves | 36,000 cleaves |
| Dimensions | 76 x 85 x 53 mm | 100 x 85 x 64 mm (with scrap collector) | 83 x 55 x 52 mm | 124 x 20 x 40 mm | 63 x 76 x 63 mm | 75 x 60 x 50 mm (with scrap collector) |
| Weight | Approx. 220 g | 350 g | Approx. 250 g | 60 g | 350 g | 200 g |
Where the K-07 works
FTTH field termination
Part of the Fiber Cleavers range — see the specifications above for the figures that matter on this work.
Mechanical splicing preparation
Part of the Fiber Cleavers range — see the specifications above for the figures that matter on this work.
Tool kit bundling
Part of the Fiber Cleavers range — see the specifications above for the figures that matter on this work.
K-07 components
- Red storage case — 105 x 80 x 60 mm (total weight with case: 300 g)
Documents for this model
Product Catalog 2026 — this model appears in our full-range catalog (PDF), published in the Downloads center.
User manual — if you need the manual for this model now, ask via the inquiry form below or on WhatsApp and we will send the available documents with your quote.
More fiber cleavers
Questions about the K-07
How long does the blade last?
The blade is rated for 36,000 cleaves. When it is done, replacement blades are a standard stock item — see Fiber Cleaver Blades in this category, and tell us your cleaver model so we match the right blade.
Can the K-07 carry our own brand?
Private labeling is made to your requirements and confirmed per order — labels with your logo, part numbers and barcodes on the tools, the inner boxes and the outer cartons, ready for your warehouse. The products most often labeled are the K-35 cleaver, the KS-1 Kevlar shears and the K-870 stripper.
Can we order a small lot, unbranded?
Yes. Neutral stock is held for the core range: small lots are welcome, you can mix models in one shipment, and restock as you sell. Prices are on request — EXW factory pricing.
Ask for a quote — K-07
Tell us the quantity, and whether you want it neutral or with your brand on it.