Fiber Inspection Microscope KX-24
Handheld fiber end-face inspection microscope in 100X, 200X and 400X versions, with 2.5mm and 1.25mm adapters — because a connector should be inspected before it is ever mated.
Typical work: End-face inspection before mating connectors in FTTH, data center and telecom work; Verifying cleaning results — inspect, clean, inspect again; Incoming inspection of patch cords and pigtails.
Get a Quote WhatsApp UsNeutral stock in small lots, or private label made to your requirements. Prices on request — EXW factory pricing.
KX-24 specifications
| Magnification | 100X, 200X or 400X (version chosen when ordering) |
|---|---|
| Adapters included | 2.5 mm (SC / FC / ST) and 1.25 mm (LC) |
| Optional adapter | SMA905 (supplied separately) |
| Connectors | SC, ST, FC, LC |
| Focus | Manual focus wheel |
| Type | Handheld, direct-view (eyepiece) |
| Dimensions | — |
| Weight | — |
How End-Face Inspection Works
Seat the connector in the matching adapter cap — 2.5 mm for SC, FC and ST, 1.25 mm for LC — look through the eyepiece and turn the focus wheel until the end face snaps sharp. The core sits in the middle of the cladding circle; anything on it matters.
What you are judging is simple: dirt and oil smears mean clean it and look again; scratches across the core, pits and cracks mean the connector is done — polishing or replacing it is cheaper than the return visit. Clean end faces show an even, unmarked surface.
One safety rule never bends, and it is printed on the scope itself: never inspect a fiber that may be live. Check the fiber is dark first — a microscope concentrates whatever light is in the fiber straight into your eye.
Where the KX-24 works
End-face inspection before mating connectors in FTTH, data center and telecom work
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
Verifying cleaning results — inspect, clean, inspect again
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
Incoming inspection of patch cords and pigtails
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
KX-24 components
- Fiber inspection microscope KX-24 (magnification version as ordered)
- 2.5mm adapter
- 1.25mm adapter
Documents for this model
Product Catalog 2026 — this model appears in our full-range catalog (PDF), published in the Downloads center.
User manual — if you need the manual for this model now, ask via the inquiry form below or on WhatsApp and we will send the available documents with your quote.
More fiber cleaning
Questions about the KX-24
Can the KX-24 carry our own brand?
Private labeling is made to your requirements and confirmed per order — labels with your logo, part numbers and barcodes on the tools, the inner boxes and the outer cartons, ready for your warehouse. The products most often labeled are the K-35 cleaver, the KS-1 Kevlar shears and the K-870 stripper.
Can we order a small lot, unbranded?
Yes. Neutral stock is held for the core range: small lots are welcome, you can mix models in one shipment, and restock as you sell. Prices are on request — EXW factory pricing.
Ask for a quote — KX-24
Tell us the quantity, and whether you want it neutral or with your brand on it.